Installation Instruction of Decking

1. Before fixing the joist, make sure the ground is solid and flat, so that the joist can be fastened tightly on the ground. Then dig holes with percussion drill in the deck area and bury the plastic tube into the holes.
2. Take the buried expansion tube as center, put the joist stably on the center line, pierce the joist with pistol drill and nail the screw into the expansion tube 300-350mm.
3. Nail the expansion screw into the top of the vertical joint of two joists.
4. Put flat the deck along the vertical direction of joists, the ending deck can be fixed on the joist with screw to make sure the accuracy of it being the base floor for other decks.
5. Install clips on the other side of the first deck, and start installing decks in order.
6. Install 2 joists in the longitudinal joint of two decks.
7. To avoid possible deformation caused by temperature change, joists can not be tied too closely.
8. Outside the last deck, use the same installation method as that of the first deck, install edge seal and terminal sealing board.